ProSafe FVS114v1.0_09-beta firmware using FVX538 (Dynamic IP and Static IP)

Note: New latest firmware is tested and works fine

This is common Box to Box VPN tunnel with one side dynamic IP using DynDNS servcies.

Not testes but shoud work with FVS318v3.

Download the instruction-Case Study 105(544KB)


Check out our download section for DynDNS Updater

ProSafe VPN Client 10.3.5 using FVS114(Dynamic IP and Static IP)

This is common Client to Box VPN tunnel with one side dynamic IP with FVS114 Static IP. You can also "virutual adapter" option if you prefer. You will need to go options>global settings> and check "Allow to specify internal network address"

Did you know FVS114 only allow one Remote Access policy? If you need more then one remote access to your router, just do simply change with current case study

      • In case study, single IP is used. simply youse "IP Range" x.x.x.x ~ x.x.x.x
      • This should fix your simple solutions

ProSafe VPN Client 10.7.2 using FVS114(Dynamic IP and Static IP)

This is common Client to Box VPN tunnel with one side dynamic IP with FVS114 Static IP. This documentation is donated.

© 2006 VPN Case Study | All Rights Reserved |